I bought the book, all of the Special Reports, all the Construction Bargain Strategies books and several other MP3 & DVD files. Mark's book and related information IS THE BEST MATERIAL AVAILABLE! If you are just getting started, you can't lose buying these materials. Jack in Martinsburg, WV

Joseph's Forum Posts: 0
Journal Entries: 7
Interview Answers: 62

Send Private Message


Image from Joseph's blog

First ICF pour

Posted to EurekaHouse-ICF by Joseph in Berkeley, CA on 3/6/2008 10:08:17 PM

We poured our basement walls today. It was our first ICF pour. We weren't ready, but I didn't want to wait until next week, with rains expected this weekend. Hectic, but everything came together fine. We poured 23 yards into 9'-4" tall walls, no blow outs. Two guys were running around ahead of the pump hose tweaking the bracing and scabbing plywood over open joints in the block. We didn't have time to sleeve for some service penetrations into the mechanical room so I cut them after the concrete turned green. Plumbing the wall was a chore. Typically you lean the wall towards the bracing so you can push it straight after the pour ( it's really hard to pull towards the bracing). We didn't lean it in enough and had to push the walls from the backside by setting up whalers and braces off the existing fence and excavation walls. We will try to place the basement slab and build the floor deck above the basement next week. Once that's done, we will backfill and work on the footings for the rest of the house.

Pat's Forum Posts: 127 Journal Entries: 8 Interview Answers: 61 Average Forum Rating: 3.36 Send Private Message Image from Pat's blog 3/11/2008	What brand of ICF and SIPS are you using?  We are looking to build with the same in the sierras east of you.
Joseph's Forum Posts: 0 Journal Entries: 7 Interview Answers: 62 Send Private Message Image from Joseph's blog 3/12/2008	Hi, I'm using Buildblock ICF's and Insulspan SIP's. I'm a Buildblock dealer installer. A good SIP contact is Mic Charmicheal of Sipbuilders. For ICF in the Sierras I would recommend Tim Butts of Advanced Environmental Building Design. Let me know if you would like their contact numbers.   Joey

Click here to reply...

Why we stay

Posted to EurekaHouse-ICF by Joseph in Berkeley, CA on 3/3/2008 11:16:32 PM

Views of the Golden Gate bridge are just over that house.

Photos

Rocky Start

Posted to EurekaHouse-ICF by Joseph in Berkeley, CA on 3/1/2008 11:03:31 PM

We moved out of our house in September 2007, one week before the twins were born. I didn't have my permit yet even though plans were submitted to the county in July. Got the permits Thanksgiving and I started tearing down the house.

We are living in a two bedroon apartment at Lake Merrit. Jasper and Juliet in the small bedroom, Jackson and Jordan (the twins), Janie and I in the larger bedroom.

I had to start building in January, I couldn't wait, it had been too long to get to this point. one year designing, one year getting aproval from the Municipal Advisory Commitee, one year preparing working drawings and structural engineering, and six months with two plan checks to get a permit. 

I know I shouldn't have dug my basement in winter, as soon as they took away the diggers the rains came. The first two weeks of my project were spent hauling out buckets of mud that had caved into my basement. Everyday we tried to recoup what had happened the night before.

Finally the sun came out. I two weeks we got the hole cleaned, control lines set, footing forms in, rebar, inspection, 26 yards of concrete, stripped the forms and stacked the ICF for the basement. We're getting ready to pour the walls on Thursday after we set all the ledger hangers and get an inspection.

The partial basement is about 20% of the building footprint. I expect the on grade footings to be much easier.

Photos

Two feet of water (mine) in the hole.	Day one setting batter boards	formed up ready to go
my, what big footers you have Grandma	26 yards and only the basement	First day stacking walls
End of the first day	End of day 2

Try a JPEG

Posted to EurekaHouse-ICF by Joseph in Berkeley, CA on 3/1/2008 10:56:59 PM

Her are jpegs of the plans but they wont be big like a PDF

Photos

cover sheet	first floor	second floor
elevations	elevations

PDFs

Posted to EurekaHouse-ICF by Joseph in Berkeley, CA on 3/1/2008 10:49:35 PM

I guess adding a PDF doesn't work

Plans

Posted to EurekaHouse-ICF by Joseph in Berkeley, CA on 3/1/2008 10:33:19 PM

Here is a PDF of my plans.

Got my Permit!

Posted to EurekaHouse-ICF by Joseph in Berkeley, CA on 12/17/2007 3:02:56 PM

I'm just starting out on my first Whole House building project. Been designing and planning and dealing with bureaucracies for four years now, and just received my building permit (no small accomplishment).

The house will be in the hills across the bay from the Golden Gate Bridge. It will be all ICF construction with an SIP roof system and Solar Radiant heating system.

The Demo guys are busting out the existing foundation as I write this, I hope to pour my footings early January 2008.

Douglas's Forum Posts: 19 Journal Entries: 7 Interview Answers: 69 Average Forum Rating: 3.60 Send Private Message Image from Douglas's blog 12/26/2007

You found vacant land in Berkeley?  Did not know that any existed.

Click here to reply...